Zimbra server的安裝
一、 系統要求及配置環境
Redhat Linux AS 4 需要完全安裝
Zimbra server 5 for redhat 4
固定IP：61.183.xx.xx
域名：xxx.com，并對域名作mx解析到61.183.xx.xx
服務器采用三塊72.8g硬盤作raid5陣列，可用空間為145.6g
二、 安裝操作系統
1. 正常安裝Redhat linux AS 4，在分區時選擇自動分區。
2. 在選擇防火墻時必須選擇關閉防火墻。
3. 在選擇selinux時，必須選擇禁用。
4. 在選擇程序時選擇“全部安裝”。
三、 安裝前的配置
安裝前必須配置dns服務。
1. 配置/etc/named.conf文件，配置如下：
- // named.conf for Red Hat caching-nameserver
- //
- options {
- directory "/var/named";
- dump-file "/var/named/data/cache_dump.db";
- statistics-file "/var/named/data/named_stats.txt";
- forwarders {202.103.24.68;};
- // query-source address * port 53;
- };
- //
- // a caching only nameserver config
- //
- controls {
- inet 127.0.0.1 allow { localhost; } keys { rndckey; };
- };
- zone "." IN {
- type hint;
- file "named.ca";
- };
- zone "localdomain" IN {
- type master;
- file "localdomain.zone";
- allow-update { none; };
- };
- zone "localhost" IN {
- type master;
- file "localhost.zone";
- allow-update { none; };
- };
- zone "xxx.com" IN {
- type master;
- file "xxx.com.zone";
- allow-update { none; };
- };
- zone "xx.88.168.192.in-addr.arpa" IN {
- type master;
- file "xx.88.168.192.in-addr.arpa";
- allow-update { none; };
- };
- zone "0.0.127.in-addr.arpa" IN {
- type master;
- file "named.local";
- allow-update { none; };
- };
- zone "0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa" IN {
- type master;
- file "named.ip6.local";
- allow-update { none; };
- };
- zone "255.in-addr.arpa" IN {
- type master;
- file "named.broadcast";
- allow-update { none; };
- };
- zone "0.in-addr.arpa" IN {
- type master;
- file "named.zero";
- allow-update { none; };
- };
#p#
2. 在/var/named/chroot/var/named創建文件68.88.168.192.in-addr.arpa，并作以下配置：
- TTL 86400
- @ IN SOA mail.xxx.com. admin.xxx.com. (
- 1997022700 ; Serial
- 28800 ; Refresh
- 14400 ; Retry
- 3600000 ; Expire
- 86400 ) ; Minimum
- IN NS mail.xxx.com.
- 1 IN PTR mail.xxx.com.
3. 在/var/named/chroot/var/named創建文件xxx.com.zone,并作以下配置：
- $TTL 86400
- @ IN SOA mail.xxx.com. admin.xxx.com. (
- 42 ; serial (d. adams)
- 3H ; refresh
- 15M ; retry
- 1W ; expiry
- 1D ) ; minimum
- IN NS mail.xxx.com.
- IN MX 0 mail.xxx.com.
- localhost IN A 127.0.0.1
- mail IN A 192.168.88.xx
4. 在/var/named/下創建鏈接，命令如下：
[root@mail named]# ln -s /var/named/chroot/var/named/68.88.168.192.in-addr.arpa
[root@mail named]# ln -s /var/named/chroot/var/named/xxx.com.zone
5. 啟動dns服務,命令如下：
[root@mail home]# service named restart
6. 自動啟動dns服務，命令如下：
[root@mail home]# chkconfig named on
四、 安裝zimbra server
1. 關閉sendmai服務及停止sendmail服務
- [root@mail home]# chkconfig sendmail off
- [root@mail home]# service sendmail stop
2. 編輯/etc/hosts文件。如下：
- # Do not remove the following line, or various programs
- # that require network functionality will fail.
- 127.0.0.1 localhost.localdomain localhost
- 192.168.88.68 mail.xxx.com mail
3. 編輯/etc/resolv.conf。如下：
- search xxx.com
- nameserver 192.168.88.xx
- nameserver 202.103.24.68
4. 解壓zimbra server安裝包
裝安裝包放在/var/tmp下，并解壓，命令如下：
- [root@mail tmp]# tar zxvf zcs-5.0.16_GA_2921.RHEL4.20090429033149
【編輯推薦】
- Zimbra郵件系統安裝
- 開源軟件商Zimbra擬明年增加Web郵箱IM功能
- sendmail的安裝方法
- Postfix的安裝
- Postfix的配置
- sendmail的安裝方法
- Thunderbird 配置手冊
