IPV6的配置實例

作者：佚名 2009-06-09 10:03:11

企業動態

公司構建了２個IPV6的網絡，但是這兩個網絡不在同一個地域范圍內，如果要想通信，必須要跨越IPV4的網絡，為了達到通信的目的，決定采用隧道技術。

試驗背景：公司構建了２個IPV6的網絡，但是這兩個網絡不在同一個地域范圍內，如果要想通信，必須要跨越IPV4的網絡，為了達到通信的目的，決定采用隧道技術。

試驗目的：

1、采用GRE隧道技術來實現；
2、實現PC1能夠和PC2之間PING通；
3、IPV6路由的實現采用IPV6 RIP實現；

試驗拓撲：

1.配置路由器端口的ip地址

Router#
Router#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#no ip domain lookup
Router(config)#hostname aaa
aaa(config)#interface f0/0
aaa(config-if)#no switchport
aaa(config-if)#ip add 192.168.1.1 255.255.255.0
aaa(config-if)#no shut
aaa(config-if)#exit
aaa(config)#interface loopback 1
aaa(config-if)#ipv6 address 2000::1/64
aaa(config-if)#exit

Router#conf t
Router(config)#no ip domain lookup
Router(config)#hostname bb
bb(config)#interface f0/0
bb(config-if)#no switchport
bb(config-if)#ip add 192.168.1.2 255.255.255.0
bb(config-if)#no shut
bb(config-if)#exit
bb(config)#interface f0/1
bb(config-if)#no switchport
bb(config-if)#ip add 172.16.1.1 255.255.255.0
bb(config-if)#no shut
bb(config-if)#exit

Router#conf t
Router(config)#no ip domain lookup
Router(config)#hostname ccc
ccc(config)#interface f0/0
ccc(config-if)#no switchport
ccc(config-if)#ip add 172.16.1.2 255.255.255.0
ccc(config-if)#no shut
ccc(config-if)#exit
ccc(config)#interface loopback 1
ccc(config-if)#ipv6 add 2001::1/64
ccc(config-if)#exit

2.配置ipv4的動態路由

aaa(config)#router rip
aaa(config-router)#version 2
aaa(config-router)#no auto-summary
aaa(config-router)#network 192.168.1.0
aaa(config-router)#exit

bb(config)#router rip
bb(config-router)#version 2
bb(config-router)#no auto-summary
bb(config-router)#network 192.168.1.0
bb(config-router)#network 172.16.1.0
bb(config-router)#exit

ccc(config)#router rip
ccc(config-router)#version 2
ccc(config-router)#no auto-summary
ccc(config-router)#network 172.16.1.0
ccc(config-router)#exit

3.查看路由表

 aaa#show ip rou
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static route
       o - ODR, P - periodic downloaded static route

Gateway of last resort is not set

     172.16.0.0/24 is subnetted, 1 subnets
R       172.16.1.0 [120/1] via 192.168.1.2, 00:00:01, FastEthernet0/0
C    192.168.1.0/24 is directly connected, FastEthernet0/0

bb#show ip rou
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static route
       o - ODR, P - periodic downloaded static route

Gateway of last resort is not set

     172.16.0.0/24 is subnetted, 1 subnets
C       172.16.1.0 is directly connected, FastEthernet0/1
C    192.168.1.0/24 is directly connected, FastEthernet0/0

ccc#show ip rou
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static route
       o - ODR, P - periodic downloaded static route

Gateway of last resort is not set

     172.16.0.0/24 is subnetted, 1 subnets
C       172.16.1.0 is directly connected, FastEthernet0/0
R    192.168.1.0/24 [120/1] via 172.16.1.1, 00:00:01, FastEthernet0/0

#p#

4.給路由器做隧道

   aaa#conf t
aaa(config)#interface tunnel 1
aaa(config-if)#ipv6 address 2002::1/64
aaa(config-if)#tunnel source 192.168.1.1
aaa(config-if)#tunnel destination 172.16.1.2
aaa(config-if)#exit

ccc(config)#interface tunnel 1
ccc(config-if)#ipv6 address 2003::1/64
ccc(config-if)#tunnel source 172.16.1.2
ccc(config-if)#tunnel destination 192.168.1.1

5.在路由器上配置ipv6并應用到接口

   aaa(config)#ipv6 unicast-routing
aaa(config)#ipv6 router rip wang
aaa(config-rtr)#exit
aaa(config)#interface tunnel 1
aaa(config-if)#ipv6 rip wang enable
aaa(config-if)#exit
aaa(config)#interface loopback 1
aaa(config-if)#ipv6 rip wang enable

ccc(config)#ipv6 unicast-routing
ccc(config)#ipv6 router rip wang
ccc(config)#interface tunnel 1
ccc(config-if)#ipv6 rip wang enable
ccc(config)#interface loopback 1
ccc(config-if)#ipv6 rip wang enable
ccc(config-if)#exit

6.查看ipv6的路由表

    aaa#show ipv6 rou
IPv6 Routing Table - 8 entries
Codes: C - Connected, L - Local, S - Static, R - RIP, B - BGP
       U - Per-user Static route
       I1 - ISIS L1, I2 - ISIS L2, IA - ISIS interarea, IS - ISIS summary
       O - OSPF intra, OI - OSPF inter, OE1 - OSPF ext 1, OE2 - OSPF ext 2
       ON1 - OSPF NSSA ext 1, ON2 - OSPF NSSA ext 2
C   2000::/64 [0/0]
     via ::, Loopback1
L   2000::1/128 [0/0]
     via ::, Loopback1
R   2001::/64 [120/2]
     via FE80::CE00:4FF:FEA0:F000, Tunnel1
C   2002::/64 [0/0]
     via ::, Tunnel1
L   2002::1/128 [0/0]
     via ::, Tunnel1
R   2003::/64 [120/2]
     via FE80::CE00:4FF:FEA0:F000, Tunnel1
L   FE80::/10 [0/0]
     via ::, Null0
L   FF00::/8 [0/0]
     via ::, Null0

cc#show ipv6 rou
IPv6 Routing Table - 8 entries
Codes: C - Connected, L - Local, S - Static, R - RIP, B - BGP
       U - Per-user Static route
       I1 - ISIS L1, I2 - ISIS L2, IA - ISIS interarea, IS - ISIS summary
       O - OSPF intra, OI - OSPF inter, OE1 - OSPF ext 1, OE2 - OSPF ext 2
       ON1 - OSPF NSSA ext 1, ON2 - OSPF NSSA ext 2
R   2000::/64 [120/2]
     via FE80::CE00:EFF:FE4C:F000, Tunnel1
C   2001::/64 [0/0]
     via ::, Loopback1
L   2001::1/128 [0/0]
     via ::, Loopback1
R   2002::/64 [120/2]
     via FE80::CE00:EFF:FE4C:F000, Tunnel1
C   2003::/64 [0/0]
     via ::, Tunnel1
L   2003::1/128 [0/0]
     via ::, Tunnel1
L   FE80::/10 [0/0]
     via ::, Null0
L   FF00::/8 [0/0]
     via ::, Null0

7.驗證試驗結果:ping對短

    aaa#ping 2001::1

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 2001::1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 276/492/668 ms

ccc#ping 2000::1

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 2000::1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 532/610/740 ms

【編輯推薦】

解析移動IPv6數據傳輸及存在的主要問題
IPv4地址何去何從 IPv6不向下兼容的尷尬
IETF在IPv6網絡地址轉換器問題上未達成一致

責任編輯：夏雨來源： 56CTO

思科 IPV6 配置實例

国产精品电影_久久视频免费_欧美日韩国产激情_成年人视频免费在线播放_日本久久亚洲电影_久久都是精品_66av99_九色精品美女在线_蜜臀a∨国产成人精品_冲田杏梨av在线_欧美精品在线一区二区三区_麻豆mv在线看

IPV6的配置實例